1103 15000kv Outrunner Brushless Motor

The high-speed outer rotor has dynamic balance correction, neodymium magnetic steel or arc-shaped high-efficiency magnetic tiles, a standard shaft with a diameter of 1.5mm, and the fixed part of the outer rotor is thickened with steps.

The motor is suitable for operation in 1-2S lithium batteries, depending on prop size 

The recommended blade size for 2S is GF1635-4/GF1610-2/GF1608-3

For 1S, the recommended blade size is GF1636-4.

Thrust test data (GF1635-4 for blade), 1S voltage: 50% throttle 22g, 75% throttle 41g, 100% throttle 50g.

2S voltage: 25% throttle at 26g, 50% throttle at 54g, 75% throttle at 85g, 100% throttle at over 100g.

Generally, an electric regulator can use around 10A for 1 second, and 15-20A is recommended for 2 seconds. Note that some brushless electric regulators have poor compatibility with ultra-high KV, cannot move up or down at high speeds, or have light jitter. The current is abnormally large and may directly heat up and burn the motor. Pay attention to starting small current actual testing. If the Blheli electric regulator parameters are incorrect, they can be adjusted before use.

The total length of the motor output line is about 40mm, and the motor weighs only 3 grams.

Package includes:

Motor x 1